VALVES AND AIR CYLINDERS KPM FOR ALUMINIUM MACHINE
TA000330 MICROSPRAY VALVE
Microspray valve with venturi effect.The unit gives a continuous lubrication or a cooling spray for tools,cutting blades or parts.
——————————————————————————————————————
AF500200 & AF500300 HIGH-LOW PRESSURE PNEUMATIC DEVICE
The device contains a microregulator, a non return valve and a two way valve which can be N.C. or N.O.
It can be used in any case it is necessary to have two different pressures, the supply and another one which can be regulated from 0 to 3 bar.
——————————————————————————————————————-
ZA718800 UNI-DIRECTIONAL VALVE
Is a 2/2 valve with one pneumatic control and assembled directly on the inlets and outlets ports of the air cylinder, allow locking the piston stroke in case of emergency stop, brake of a tube or airing missing.
——————————————————————————————————————–
TRK00003 PNEUMATIC-ELECTRIC TRANSDUCER
On reaching a pre-established pressure, converts the pneumatic signal P to an electric ON-OFF signal. It can supply directly an emergency signal of a solenoid valve for the interception of the fluid. It provides two distinct signals of N.C. or N.O.
———————————————————————————————————————
KPM SOLENOID VALVES FOR AIR CYLINDERS
CM6000820000L 5/2 SOLENOID VALVE WITH ONE COIL
CM3000820000L 3/2 SOLENOID VALVE WITH ONE COIL
CM6200820000L 5/2 SOLENOID VALVE WITH TWO COILS
CM680082000CL 5/3 SOLENOID VALVE WITH CLOSE CENTERS
——————————————————————————————————————–
KPM PNEUMATIC VALVES FOR AIR CYLINDERS
CM6500080000 5/2 VALVE WITH ONE PNEUMATIC CONTROL
CL200080000 3/2 VALVE WITH ONE PNEUMATIC CONTROL
CM6520080000 5/2 VALVE WITH TWO PNEUMATIC CONTROLS
CM6580080000 5/3 VALVE WITH CLOSE CENTERS
———————————————————————————————————————
AIR-OIL RESERVOIR
The reservoir is a device which allows the energetic accumulation of a fluid. The use with air is wherever a supply of fluid is required or to stabilize the net of pressure. For liquids it acts as supply and control for applications of lubrication or cooling.
——————————————————————————————————————–
SINGLE ACTING NON ROTATING CLAMPING CYLINDER
RJ 25Χ75 OUTSIDE DIAMETER : 30mm LENGTH OF TUBE : 150mm
RJ 35×30 OUTSIDE DIAMETER : 40mm LENGTH OF TUBE : 80mm
RJ 35X75 OUTSIDE DIAMETER : 40mm LENGTH OF TUBE : 150mm
RJ 35X115 OUTSIDE DIAMETER : 40mm LENGTH OF TUBE : 220mm
RJ 40×115 OUTSIDE DIAMETER : 45mm LENGTH OF TUBE : 220mm
——————————————————————————————————————–
KCL00248 BASE SUPPORT OF CLAMPING CYLINDER WITH TWO LEVER LOCKING
——————————————————————————————————————–
PLASTIC PAD TO SCREW ON THE CYLINDER ROD
——————————————————————————————————————–
HYDRAULIC SPEED CONTROL
The hydraulic cylinder is usually coupled with a pneumatic cylinder to get a constant and controlled speed movement.
——————————————————————————————————————–