SECONDARY VALVES FOR FRL AIRCOMP


SECONDARY VALVES FOR FRL

3 WAY ON-OFF VALVE WITH LOCK
* Used to shut off the air supply while relieving the downstream circuit.
* The block device is particularly useful during maintenance operations. It prevents
the system from being accidentally or wrongly pressurized.
* It can be wall mounted using the relative holes.
* Discharge connection: G1/4″.
* Maximum inlet pressure: 12,5 Bar (1,25 MPa).
* Temperature range: 5¸50°C (41¸122°F).
* The device is equipped with 1 lock.
* Max. torque inserts G1/2” IN-OUT: 80 N·m.
* Reference flow rate (P=10 Bar – Dp=1 Bar): 3075 Nl/min.
* Weight: 0,390 Kg.
————————————————–

SHUT-OFF VALVE
* Device used to shut off the air supply while relieving the downstream circuit by
a remote electric control.
* Available with MICROSOL type or in compliance with CNOMO standards remote
electric control (to be ordered separately).
* Available with remote pneumatic control.
* It can be wall mounted using the relative holes.
* Discharge connection: G1/4″.
* Minimum pressure admitted: 3 Bar (0,3 MPa).
* Maximum working pressure: 10 Bar (1 MPa).
* Temperature range: 5¸50°C (41¸122°F).
* Max. torque inserts G1/2” IN-OUT: 80 N·m.
* Reference flow rate (P=10 Bar – Dp=1 Bar): 3075 Nl/min.
* Weight: 0,400 Kg.
————————————————-

SLOW START VALVE
Gradually pressurizes the system until reaching the set operating pressure value.
* Before delivering the maximum available pressure, the air is allowed to slowly
flow around the downstream circuit until about 60% of the pressure is reached
upstream.
* Use the built-in flow governor to establish the pressurizing time.
* It can be wall mounted using the relative holes.
* Minimum pressure admitted: 3 Bar (0,3 MPa).
* Maximum working pressure: 10 Bar (1 MPa).
* Temperature range: 5¸50°C (41¸122°F).
* Max. torque inserts G1/2” IN-OUT: 80 N·m.
* Reference flow rate (P=10 Bar – Dp=1 Bar): 3075 Nl/min.
* Weight: 0,410 Kg.
————————————————-

DRIP LEG DRAIN
Automatically eliminates condensed fluids from pipes.
* In the absence of pressure the outlet remains opened, thus ensuring that all
settled fluid particles are eliminated.
* Equipped with hose nipple to convey the collected condensate away.
* To allow servicing operations, pressure can be relieved by slackening the knurled
part at the end of the appliance.
* Maximum operating pressure 12,5 Bar (1,25 MPa).
* Temperature range 5¸50°C (41¸122°F).
* 1/2″ BSP inlet connection.
* Weight 0,225 Kg.
————————————————-

CONVEYOR X
Outlet Oil Remover/Silencer for pneumatic systems.
* Eliminate oil mist pollution produced by valve and cylinder outlets.
* Reduce acoustic pollution by 25 dBA, restoring noise levels to values accepted
by the safety standards in force.
* Temperature range 2¸50°C (36¸122°C).
* Filtering element in coalescent glass fiber.
* Oil accumulating cup with drainage plug.
* The collected oil can be conveyed through a ø 6 mm pipe.
* CONVEYOR – X is disposable and should therefore be replaced when the
overpressure becomes excessive.
———————————————-